It allows rolls to be pre-assembled onto the quick-change table or bracket on the quick-change shaft.
The entire pipe production line, including the plate forming, sizing, and rough straightening sections, can be equipped with a spare quick-change worktable.
| Quick-Change Worktable ERW Tube Mill — Common Specifications Production Table | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Application: high-frequency straight-seam (ERW) welded tube lines with quick-change roll stands / worktables; materials Q195/Q235/Q355, cold-rolled and galvanized strip; round, square and rectangular tubes. Quick-change models target small and medium sizes with short changeover times. | ||||||||||||
| No. | Mill Model | Round Tube Forming Range (Φ mm) | Round Tube Min. Φ (mm) | Round Tube Max. Φ (mm) | Square Tube Forming Range (mm) | Square Tube Min. Side (mm) | Square Tube Max. Side (mm) | Matching Rectangular Tube (Ref, mm) | Wall Thickness Range (mm) | Min. Wall Thickness (mm) | Max. Wall Thickness (mm) | Max. Line Speed (m/min) |
| 1 | ERW20 | Φ8–Φ20 | 8 | 20 | 6×6–15×15 | 6 | 15 | 8×12, 10×15 | 0.3–1.5 | 0.3 | 1.5 | 120 |
| 2 | ERW32 | Φ10–Φ32 | 10 | 32 | 10×10–25×25 | 10 | 25 | 10×20, 15×25 | 0.5–2.0 | 0.5 | 2 | 120 |
| 3 | ERW50 | Φ20–Φ50 | 20 | 50 | 15×15–40×40 | 15 | 40 | 20×30, 25×40 | 0.8–3.0 | 0.8 | 3 | 120 |
| 4 | ERW76 | Φ32–Φ76 | 32 | 76 | 25×25–60×60 | 25 | 60 | 30×50, 40×60 | 1.2–4.0 | 1.2 | 4 | 120 |
| 5 | ERW89 | Φ42–Φ89 | 42 | 89 | 35×35–70×70 | 35 | 70 | 40×60, 50×70 | 1.5–4.5 | 1.5 | 4.5 | 110 |
| 6 | ERW114 | Φ48–Φ114 | 48 | 114 | 40×40–90×90 | 40 | 90 | 50×70, 60×80 | 1.5–4.5 | 1.5 | 4.5 | 65 |
| Notes and Supplementary Remarks | ||||||||||||
| Application Scope | ERW tube mills with quick-change roll stand / quick-change worktable structure; covers round, square and rectangular tubes. | |||||||||||
| Applicable Materials | Q195 / Q235 / Q355, cold-rolled strip and galvanized strip. | |||||||||||
| Line Speed Basis | The maximum line speeds shown are the upper limits for thin-wall small tubes; heavy-wall and large-size production runs correspondingly slower. | |||||||||||
| Finished Length | Standard 6–12 m, length tolerance ±3 mm (other lengths by agreement). | |||||||||||
| Rectangular Tube Note | Not unlimited combinations: sizes are constrained by the forming pass and strip width; new sizes need dedicated quick-change rolls. | |||||||||||
| Structure Note | Standard quick-change worktable version, unlike conventional fixed-stand mills; large diameters (Φ219 and above) are generally not built with this structure. | |||||||||||
When producing pipes of different sizes, the quick-change worktable that requires replacement can be directly loaded onto the pipe production line, replacing the existing pipe production unit.
This system eliminates the need to disassemble and install rollers during roller replacement, saving significant production time and improving pipe manufacturing efficiency.
This pipe making machine is suitable for pipe manufacturers producing small and medium-diameter welded pipes.
|
ERW TUBE MILL LINE |
|||||
|
Model |
Round pipe mm |
Square pipe mm |
Thickness mm |
Working spead m/min |
|
|
ERW20 |
Ф8-Ф20 |
6x6-15×15 |
0.3-1.5 |
120 |
Read More |
|
ERW32 |
Ф10-Ф32 |
10×10-25×25 |
0.5-2.0 |
120 |
|
|
ERW50 |
Ф20-Ф50 |
15×15-40×40 |
0.8-3.0 |
120 |
|
|
ERW76 |
Ф32-Ф76 |
25×25-60×60 |
1.2-4.0 |
120 |
|
|
ERW89 |
Ф42-Ф89 |
35×35-70×70 |
1.5-4.5 |
110 |
|
|
ERW114 |
Ф48-Ф114 |
40×40-90×90 |
1.5-4.5 |
65 |
|
|
ERW140 |
Ф60-Ф140 |
50×50-110×110 |
2.0-5.0 |
60 |
|
|
ERW165 |
Ф76-Ф165 |
60×60-130×130 |
2.0-6.0 |
50 |
|
|
ERW219 |
Ф89-Ф219 |
70×70-170×170 |
2.0-8.0 |
50 |
|
|
ERW273 |
Ф114-Ф273 |
90×90-210×210 |
3.0-10.0 |
45 |
|
|
ERW325 |
Ф140-Ф325 |
110×110-250×250 |
4.0-12.7 |
40 |
|
|
ERW377 |
Ф165-Ф377 |
130×130-280×280 |
4.0-14.0 |
35 |
|
|
ERW406 |
Ф219-Ф406 |
170×170-330×330 |
6.0-16.0 |
30 |
|
|
ERW508 |
Ф273-Ф508 |
210×210-400×400 |
6.0-18.0 |
25 |
Read More |
|
ERW660 |
Ф325-Ф660 |
250×250-500×500 |
6.0-20.0 |
20 |
Read More |
|
ERW720 |
Ф355-Ф720 |
300×300-600×600 |
6.0-22.0 |
20 |
Read More |
|
STAINLESS STEEL PIPE PRODUCTION LINE |
|||||
|
Model |
Round pipe mm |
Square pipe mm |
Thickness mm |
Working speed m/min |
|
|
SS25 |
Ф6-Ф25 |
5×5-20×20 |
0.2-0.8 |
10 |
Read More |
|
SS32 |
Ф6-Ф32 |
5×5-25×25 |
0.2-1.0 |
10 |
Read More |
|
SS51 |
Ф9-Ф51 |
7×7-40×40 |
0.2-1.5 |
10 |
Read More |
|
SS64 |
Ф12-Ф64 |
10×10-50×50 |
0.3-2.0 |
10 |
Read More |
|
SS76 |
Ф25-Ф76 |
20×20-60×60 |
0.3-2.0 |
10 |
Read More |
|
SS114 |
Ф38-Ф114 |
30×30-90×90 |
0.4-2.5 |
10 |
Read More |
|
SS168 |
Ф76-Ф168 |
60×60-130×130 |
1.0-3.5 |
10 |
Read More |
|
SS219 |
Ф114-Ф219 |
90×90-170×170 |
1.0-4.0 |
10 |
Read More |
|
SS325 |
Ф219-Ф325 |
170×170-250×250 |
2.0-8.0 |
3 |
Read More |
|
SS426 |
Ф219-Ф426 |
170×170-330×330 |
3.0-10.0 |
3 |
Read More |
|
SS508 |
Ф273-Ф508 |
210×210-400×400 |
4.0-12.0 |
3 |
Read More |
|
SS862 |
Ф508-Ф862 |
400×400-600×600 |
6.0-16.0 |
2 |
Read More |